Product overview

RCB series asphalt insulation pump is suitable for conveying non-corrosive, no solid particles, at room temperature has solidification medium. It is especially suitable for outdoor installation in cold areas and occasions where the medium needs heat preservation during the process. The temperature of the medium can reach 250℃ and the viscosity is 5~1500cst. The reducer transmission mode should be used: in general, the pump and the motor are directly connected. The pump shaft end seal is designed in two forms: (1) mechanical seal and (2) packing seal. The user can determine according to the specific use.

Product characteristics

RCB series asphalt insulation pump gear pump, pump body front cover and back cover with hollow jacket, inlet and outlet flange. The pump is suitable for solidification at room temperature and outdoor installation in cold areas and the process requires heat preservation occasions, can use thermal oil, steam, hot water, cold water and other media to heat, heat preservation and cooling of the liquid and pump.

Product use

The pump is suitable for solidification at room temperature and outdoor installation in cold areas and the process requires heat preservation occasions, can use thermal oil, steam, hot water, cold water and other media to heat, heat preservation and cooling of the liquid and pump.

Type meaning

For example, RCB-10-03.6

RCB- Asphalt insulation pump

10- Flow rate (m3/h)

03.6- Working pressure (MPa)

Performance parameter